Moka Berserker R230 Pure Racer

Moka Frame, All, 220 - 250 mm , Prop size - 5 inch
通常価格: 9,558  (税込)
8,640  (税込)
(税抜 8,000 )
MOK-R230FK
在庫あり
+

World Drone Prix Dubai でつながったmokaframe!しばらくの間テストをしていましたが、レース向けのアームになったRが登場しました。

このフレームは従来のBerserkerと共通のフレームながらアームのディメンションをよりX形へと近づけることで機体の癖をなくしています。これにより従来のモデルよりもFCのセットアップがしやすい機体になっています。

フレーム全体も薄くなっており、空気抵抗の低減に努めています。

説明書付属しておりません、下記の組み立てビデオ等を参考に自分の好きな機体へと進化させてください。

 

-Features-

  • This is our newer Berserker race frame designed from the ground up to win. It features lightweight design and low surface area to maximise your forward kinetic energy.
  • Symmetrical motor locations diagonal spacing.
  • Low weight at ~96 grams. without hardware
  • Ultra low surface area for reduced wind resistance at high speed
  • Thick CF Arms 4mm and 1.5mm for bottom plate and 2mm for top plate
  • 16mm wide arms
  • Extensive protection for camera
  • Lower deck 20mm profile for strength
  • Innovative structural system and component layout.
  • M3x20mm aluminium fasteners to reduce weight.
  • Supports 2208  motors and 6in bullnoze props
  • Up to 45 degrees camera tilt
  • Further information will come on RCgroupe soon

-The package includes-

  • CF Top Plate : 2mm
  • CF Bottom Plate : 1.5mm
  • CF Camera Support Plate: 2mm .
  • CF arms 4mm thickness with motors patterns M2x12mm , M3x16mm and M3x19mm.
  • 4 x Anodized arms support system (Only for Moka Berserker)
  • 1x camera mount for fatshark 600 or 700TVL

-Option Items-

  • Moka power board support 120A and can use two Pololu 5v or 12v ubec
  • 3D printed mount for Gopro

-Optional Extras-

  • The frame does not include motor mount screws or washers. We recommend alu hex cap screws and alu washers to mount your motors

 

-Recommended Components-

  • All electronics, wiring, motors and props are not included and can be purchased separately. Please note that this quad is specifically designed to take a 25mm mini cam with casing or Fatshark camera 600 and 700TVL
  • Some suggested components with details of these items available on the specific product pages:
  • Cobra 2204 KV2300  *   (Most popular, for good reason, oustanding motor and a good price)
  • Cobra 2206 KV2100  (Racing power house)
  • DYS 1806 KV2300  (Best value motor on the market. Recommended for new flyers.)
  • ZTW Blue 12A  (cheap, reliable, proven history, comes with BEC)
  • ZTW Spider 12 Opto (cheap, reliable, small, proven history)
  • ZTW Mini 18A Opto  * (tiny, oustanding performance and price. Better than SN20)
  • Little Bee 20A * (new kid on the block, very high performance but less track record for reliability as yet)
  • DYS SN20 (Very popular, good performer, some reliability issues for extended power session on 4S)
  • DYS SN30 (Very popular, good performer, handles 6S well)
  • Naze 32 Acro  *  (Is there another?  The rest are clones)
  • D4R Receiver  *  (Great for Frsky users)
  • RunCam sky plus, Fatshark 600TVL, HS1177 Camera
  • VTX Pitail *   (SMA or RPSMA)
  • Battery Strap  * (Great non slip coating)
  • 14AWG Wire  *  (Pigtail for battery)
  • 18AWG Wire  * (ESC power cables)
  • XT60 Plugs  *  (For battery connection)

* Suggested build for most flyers on 3S and 4S.  For people new to the hobby we recommend the Mokafoldable
We suggest WAVE-FPV antennas and VTX 200mw is our preference though.

FPV Racer Frame:
  • All
  • 220 - 250 mm
  • Prop size - 5 inch

投稿はありません

レビューを書く